Відео

Can't reverse engine!!!!!😮

Ive always been dead on first try on my subi belts

Awesome

Or go electric and nver have all those crazy parts and adjustments

Some engines should not be turned backwards.

It's either you need some new suspension or you're just a really big guy

I just make sure it's tight on the tight side and everythings lined up and set the tension. Jk, I still get it wrong sometimes... Belts are stupid. 👍

Never turn a engine backwards, thst cause damage to them

Mechanics have been doing this since the mid 1950's

Love it🎉

Great. Now I want to play tropico

I had an 04 mazda 6 v6, which drives the PS pump off the back of one of the cams. Mine had a tensioner that went bad and was like 80 bucks, but 08+ used a stretch fit belt and no tensioner. The folks on the forum said to use a zip tie around the belt and pulley then crank the engine. Seemed so sketchy, but the zip tie pulled the belt onto the pulley and then snapped off. One of my favorite automotive tricks now.

You get a sun JUST for the Salsa.

It gives you an extra inch of reach though. Loo

How to get your timing off by one sprocket? What the hell is the point of that? You get it to top dead with all markings cleared, this is NOT hard.

No fah'kn waaayyy!!!!!

Love the switch blade affect, peeps should just buy it on the presentation 😅

Fkn legend!

Don't need to remove belt, just the sprocket bolt. Don't do that crap with a bit. You'll score the sprocket or stress the belt

I only buy car with timing chains ever since my 02 Sentra Ser Pec V had it. I won't buy a car with a belt.

I wrap mine in duct tape haha

Ice problems 😂

El presidente wants his music back 😂😂😂

No way!

You know about shaking it more than 3 times means? 😮

Thats actually pretty good. The twin cam suburus can be awfully tight belts though

Do the job correctly and double check your work and you wont have to do this.... just saying

Sketch! You only move the engine one direction. Do not move it backwards. What do I know? Good luck.

Try that with a chain 😂 see what happens

That is enough to bend a valve. Don’t do this if you have rotational resistance.

I wish I could do that trick with my chains timming 😂

Is that the tropico soundtrack?

Screw that keep going until it's Bluetooth control arms those are the new craze man!!!!!!!

Good tip

oooh, its one place away..

Sure this can help reset your belt to timing...but what about what caused the belt to slip out of timing...it doesn't fix the overall reason or broken part that caused it to slip

DON'T PANIC... IM A MECHANIC

I hate engine work anyway. Most people just get rid of it.

Can you put a burr in the sprocket that will eat you belts!

Tropico5 music

I would not say any timing set that's not going to work on a timing set that is gear driven or chain driven

Not loose, just worn to shit.

I did something similar with a mitsubishi robot. Used a little bit of paper towel and it did the same thing

Still off 😂😂😂😂

You better not turn engine in reverse ever again

Badass

Rotation in wrong direction at end. Wtf

Unless it's a chain lol

I’m pretty sure it’s just the power steering whine wich is normal

Carfull you don't bend a valve...